Fire Alarm System for School

Fire alarm system for school

The school’s fire alarm system is one of the most important and main equipment that should be considered when establishing a school. Administrators should take care of the health of students and staff. Also, there are valuable objects and documents in the school that need to be protected. Therefore, installing a fire alarm system for school will greatly reduce the risks.

Of course, the model of the system and how it works is also important, and you should get the most suitable one for the school. In this article, we will tell you what points to pay attention to when buying a fire alarm system for school and how to install it. Stay with us.

 

fire alarm system for school

All kinds of equipment for fire extinguishing in schools

Water sprinkler

Sprinklers are an important part of any fire extinguishing system. When sprinklers are used correctly, they can prevent fire from spreading to other parts of the building and greatly reduce property damage.

Fire retardant

Fire suppression systems should be installed in school kitchens, laboratories, etc. If your school has a restaurant that provides large amounts of food, they should probably be installed there as well. Many schools have laboratories with hazardous chemicals. In case of fire, these laboratories need fire suppression systems to extinguish the fire.

Fire extinguisher

Having a fire alarm system for school can prevent fires. But in the case of a small fire, having a fire extinguisher helps save lives and prevents heavy financial losses.

Installation of fire alarm system for school

Installing a fire alarm system for school depends on things like the size of the building and the number of exits and the type of system. But, in general, you should pay attention to the following things when installing a fire alarm system for school:

A school consists of a number of separate rooms, each of which is built for a specific purpose. Detectors and sensors must be installed in all rooms and classes. Install alarms near the ceiling and facing upwards in all corridors and staircases. Be careful not to place the school’s fire alarm system close to the windows and doors, because there will be problems in the operation of the system.

 

Preventing fires in schools

Usually, the chemical gasses rise to the top of the roof and direct the smoke to the lower section. In this case, the smoke detector may be faulty. So it is better to have some distance from the ceiling. The distance of 30 cm seems to be the right size and it detects smoke in time.

It is also recommended to place several CO detectors at human knee level to make the environment safer. Because sometimes the monoxide gas is placed near the ground and mixes with the air.

Tips on installing a fire alarm system for school

Prepare for emergency situations. After installing the system and in order to be more prepared, it is better to have exercises with the students so that they are aware of emergency measures. This training is not only for students. Rather, it is also an opportunity to train the staff so that they know how to react properly when there is danger, how to use the capsule and how to remove the students from the place.

 

fire alarm system for school

Repair and maintenance

You should note that installing a fire alarm system for school alone is not enough. Rather, the system needs to be checked continuously so that there is no problem in its operation. Therefore, clean the equipment once in a while and check those in wet areas. Because moisture may cause these systems to fail. Also, check that the batteries are healthy and that the backup power supply is working properly.

hour 24 support

In most schools, staff go home after work and there is no one on site to watch over equipment and hazards such as fire. Therefore, the combination of a CCTV camera for the school with a 24-hour fire alarm is necessary for remote control of the fire alarm system for school.

In this case, you can relax and change the settings remotely. In addition, even if the students are in school, you will still be able to direct them to the safest exit by checking the camera.

Check the outputs

A one-piece security system is easy to access and each exit point must be clearly visible and identifiable to ensure everyone exits quickly and safely. So, in addition to installing a fire extinguishing system in the school, you must be sure that the exit routes are suitable and help students in case of danger.

School fire alarm and extinguishing system

Quick detection of fire in case of fire can help a lot in evacuating people. Therefore, it is necessary to install a fire alarm system for school.

Pushed the fire alarm

You must be very careful in choosing a fire alarm. Because there is a possibility of manipulation by students. Therefore, the system must be two-stage or controlled by a surveillance camera, its location. In small schools, it is better to install a flasher siren and in larger schools, an audio warning system.

Data center and UPS room

According to the automation system and electronic records of students, it is often necessary to manage the temperature of the data center and UPS rooms using A/C and ventilation systems. Also, due to the high density of electrical installation cables (in trays, ladders, battery cabinets, and racks), quick detection and accurate location determination is very important and is done by the air sampling detector.

Sports hall and amphitheater

Considering the height of the ceiling of these places, it is better not to use a point detector. This is because it is not economical in terms of service and maintenance. Therefore, the best choice is to use a Beam Detector or OSID.

Classrooms and dining hall

Due to the presence of people with different cultures and understanding in these types of places, it is not recommended to use a point detector. Because students may manipulate it. Therefore, it is better to use a hidden air sampling detector.

Laboratories and workshops

These places have a significant fire risk due to the presence of dangerous chemicals. Therefore, detector selection should be done depending on the type of laboratory and workshop.