Monoxide Detector Home Depot
A carbon monoxide gas detector or alarm is a device that quickly detects this gas in case of a leak or release of carbon monoxide gas in the space and living environment, and before the volume of the gas released in the space reaches a level that poses a danger to you. It informs you about the presence of this gas by the alarm installed on it.
Home Depot has a very sensitive carbon monoxide gas sensor that detects even very small amounts of gas in the space and notifies you. The presence of a carbon monoxide detector at home and at work is so necessary that the fire department in many countries has required this detector for new buildings and until this detector is installed near gas sources such as packages, water heaters and gas stoves, it does not affect the end of our construction work.
Signs of carbon monoxide gas in closed environments and homes
When the amount of carbon monoxide in the environment or around a person increases, different symptoms appear. Carbon monoxide does not cause problems in amounts less than 50 ppm in the environment or 5% in human blood. However, amounts between 50 and 100 ppm of this substance cause neurological complications, and in amounts above 200 ppm or 20% in the blood, it causes immediate death in less than two minutes.
When this gas enters the respiratory system, it combines with blood hemoglobin and produces a substance called carboxyhemoglobin. The signs of carbon monoxide gas in the environment and in human blood are as follows:
- burning eyes
- Drowsiness and extreme fatigue
- Nausea and vomiting
- dizziness
- Blackening of the eyes
- confusion
- Weakness and lethargy
- Possibility of severe headache
- Muscle spasms and movement disorder
- convulsions
- blurred vision
- Shortness of breath
Due to the fact that heating devices are used in homes and closed environments during the cold seasons of the year, many people confuse the symptoms of poisoning with this poisonous gas with a cold. Usually, these people fall asleep, unfortunately, this gas kills people in silence.
What is a carbon monoxide detector home depot?
A carbon monoxide gas alarm or CO gas alarm is an electronic and wireless device that is used to detect and reveal carbon monoxide in small environments. This device is usually used in residential houses, hotels, dormitories, etc.
These detectors, by detecting a certain amount of carbon monoxide gas in a certain period of time, sound an alarm or alarm and inform the residents of the existence of this poisonous gas with their loud horns.
Different types of home depot sensors for monoxide detectors:
- Biomimetic Sensor
- Metal Oxide Semiconductor
- Electrochemical Sensor
- Biomimetic Sensor
The operation of these sensors depends on the gel in the device, which changes color after absorbing carbon monoxide, and this color change causes the alarm to sound.
Metal Oxide Semiconductor
When the silicon chip circuit detects carbon monoxide gas, it reduces the electrical resistance and causes an alarm.
Electrochemical Sensor
The electrodes in the chemical solution in contact with the carbon monoxide gas change the electric current and cause the alarm to sound.
Suitable places to install a monoxide detector home depot
The CO gas alarm is specifically designed for use in residential homes, hotels, dormitories, hospital rooms, guard rooms, shops, etc. to protect and save people’s lives.
The American Fire Protection Agency (NFPA) recommends that carbon monoxide detectors should be installed outside bedrooms and adjacent to rooms. Also, for added protection, every bedroom and every floor of the building should be equipped with a carbon monoxide gas alarm. If the length of the bedroom corridor is more than 12 meters, a carbon monoxide detector should be installed at both ends of the corridor.
The carbon monoxide detector should only be installed on the walls and the installation should be done in such a way that the “carbon monoxide detector” can be easily read.
How the carbon monoxide alarm works
This device is only useful when its sensor is exposed to carbon monoxide gas. Because this gas may have accumulated or spread in other parts of the house, without the device being exposed to carbon monoxide gas and being able to detect it.
Maintenance of carbon monoxide gas warning device
To keep your alarm in good condition, you should follow these steps:
- Test the device once a week by pressing the test button.
- Vacuum the device once a month to remove accumulated dust.
- Avoid spraying air fresheners, hair spray, paint, etc. near the alarm.
- Do not paint the device. The paint causes the valves to close and disrupts the proper functioning of the sensor.
- Never use detergents or solvents to clean the device. Chemicals can seriously damage the sensor.
- Also, the detector has different beeps that inform people of emergency situations or simply the need to replace the device’s battery. Sounding the horn and then stopping the sound of the siren means the presence of monoxide in the air and the need to leave the place. But if the beep sounds once every minute, it means that the battery is weak and needs to be replaced.
- Five beeps per minute means the device is nearing the end of its life and needs to be replaced with another device. It is important to monitor your device regularly and replace its batteries every 6 months.
No comment